Wuko Disc-O-Bender Twist 4040

• For hemming sheet metal from 90° down to 180° up to 1 1/4″
• No free space is required at panel edge for setting the tool on and off
• Just twist the roller stop by means of the locking bolt, place the tool on the right angle bend, twist the roller stop back and start bending

Technical Data:

• Max. bending height: 32 mm/ 1 1/4”
• Min. bending height: 8 mm/ 1/4″
• Bending capacity: 0.80 mm/0.031” (for all common materials)